2′,4′-BNA/LNA with 9-(2-Aminoethoxy)-1,3-diaza-2-oxophenoxazine Efficiently Forms Duplexes and Has Enhanced Enzymatic Resistance**

Artificial nucleic acids are widely used in various technologies, such as nucleic acid therapeutics and DNA nanotechnologies requiring excellent duplex-forming abilities and enhanced nuclease resistance. 2′-O,4′-C-Methylene-bridged nucleic acid/locked nucleic acid (2′,4′-BNA/LNA) with 1,3-diaza-2-oxophenoxazine (BNAP ( B^H )) was previously reported. Herein, a novel B^H analogue, 2′,4′-BNA/LNA with 9-(2-aminoethoxy)-1,3-diaza-2-oxophenoxazine (G-clamp), named BNAP-AEO ( B^AEO ), was designed. The B^AEO nucleoside was successfully synthesized and incorporated into oligodeoxynucleotides (ODNs). ODNs containing B^AEO possessed up to 10⁴-, 152-, and 11-fold higher binding affinities for complementary (c) RNA than those of ODNs containing 2′-deoxycytidine ( C ), 2′,4′-BNA/LNA with 5-methylcytosine ( L ), or 2′-deoxyribonucleoside with G-clamp ( P^AEO ), respectively. Moreover, duplexes formed by ODN bearing B^AEO with cDNA and cRNA were thermally stable, even under molecular crowding conditions induced by the addition of polyethylene glycol. Furthermore, ODN bearing B^AEO was more resistant to 3′-exonuclease than ODNs with phosphorothioate linkages.     

Three-dimensional porous photo-thermal fiber felt with salt-resistant property for high efficient solar distillation

The urgent need for fresh water resource is a public issue facing the world. Solar distillation for seawater desalination is a promising freshwater production method. Interfacial solar evaporation systems based on 2D photo-thermal membranes have been widely studied, but salt pollution is one of the main challenges for solar distillation. In order to solve this problem, a hydrophilic three-dimensional (3D) porous photo-thermal fiber felt (PFF) was obtained by one-step method, through a simple polydopamine (PDA) coating method with hydrophobic graphite felt as a substrate. The PFF had a good evaporation rate of 1.48 kg m^?2 h^-1 and its corresponding light-vapor conversion efficiency reached 87.4%. In addition, the PFF exhibited an excellent salt-resistant ability when applied to photo-thermal evaporation of high-salinity seawater with 10 wt% NaCl, owing to its intrinsic 3D macroporous structure for the migration circulation of salt ions. The development of the PFF offers a new route for the exploration of salt-resistant photo-thermal materials and is promising for the practical application of solar distillation.     

避雷器电阻片测试系统设计

采用工业PC机与可编程控制器、示波器、直流仪等设备设计了避雷器电阻片测试系统,阐述了本系统的控制流程及逻辑关系,用图形化编程语言编写了上位机软件,完成了避雷器电阻片在 U_1mA及0.75U_1mA下的漏电流等参数的测试,并对电阻片测试过程中的电压峰值、电流峰值进行采集存储,还存储了电阻片在整个测试过程中的能量,方便以后对测试过程中损坏的阀片进行能量、电流峰值、电压峰值方面的分析,对系统进行了初步的试验,结果表明该系统运行效果良好,实现了避雷器电阻片出厂前的测试,提高了测试效率。     

Observation of room temperature negative differential resistance in solution synthesized ZnO nanorod

We report the observation of negative differential resistance (NDR) in solution synthesized ZnO nanorod. The ZnO nanorod was fabricated as a two terminal planar device using lithographically patterned Au electrodes. The measured current–voltage response of the device has shown a negative differential resistance behavior. The peak-to-valley current ratio of the NDR is found to be greater than 4. The mechanism of this observed NDR effect has been explained based on charge trapping and de-trapping at the nanoscale contacts. It is the first observation of negative differential resistance effect in solution synthesized ZnO nanorod.     

Analytical and empirical studies on the characteristic resistances of no-insulation GdBCO racetrack pancake coil under various operating currents

This paper presents the effects of the Lorentz force on the electrical behaviors of the no-insulation (NI) GdBCO racetrack pancake (RP) coil without turn-to-turn insulation by performing charging/discharging and sudden-discharging tests. The simulation results of the 2-dimensional finite element method showed that the Lorentz forces were generated towards the center of the winding pack consisting of 60-turn GdBCO CCs, which could enhanced the turn-to-turn contact within the RP coil. The charging/discharging test results indicated that the characteristic resistance (R_c) of the NI RP coil decreased with increasing operating current, which was caused by an increase of the Lorentz force. Further, the results of the sudden-discharging tests exhibited that the Lorentz force was dissipated instantly during the sudden-discharge of the coil, since the operating current immediately decreased to zero. Overall, this study clearly demonstrated that the Lorentz force induced by the operating current exerts the electrical behaviors of an NI RP coil.     

车用塑料耐刮擦测试方法概述

耐刮擦测试是汽车内外饰塑料零件质量控制的一项重要指标。介绍了耐刮擦测试原理,刮擦头、负载、样品与刮擦头相对运动状态等是决定测试方法的关键技术要素,评价塑料耐刮擦性的方法分为目视法及仪器测量法。综述了五指刮擦法、硬度试验笔刮擦法、网格刮擦法、摩擦色牢度刮擦法及其他刮擦法测试方法,分析和总结了不同测试方法的特点和应用范围。     

无机硅酸盐涂料的研制及应用

以硅酸盐溶液为主要原料,利用少量自制的含偶联功能基团的有机硅聚合物乳液与硅酸盐进行杂化反应,同时与填料等有效的结合制备了无机硅酸盐涂料,并对涂料的性能进行研究。结果表明：制备的无机硅酸盐涂层具有优异的贮存稳定性、柔韧性、防水性、耐污性、阻燃性以及耐霉菌性等,满足建筑内外墙涂料的相关标准要求。     

Investigation of a Photochromic Diarylethene with Electron-acceptor Attached

In this contribution, an electron acceptor attached diarylethene derivative was synthesized and fully characterized. The photochromic behavior was investigated in THF. Under exposure of UV and visible light cycles, the solution color can be switched between colorless and yellow smoothly. Fatigue resistance measurements could be repeated 50 times with an acceptable degradation. Due to the electron acceptor attached to the framework of diarylethene, the photo- and thermal-stability were enhanced both. A full-photo mode switch can be established based on the well-defined states by external excitation. The molecular structures of ring-open and ring-closed form were optimized by Dmol³. The distance between photocyclizing atoms in aptiparallel conformation meets the requirement for photochromic reaction. And the calculated absorption wavelengths were also in agreement with the experimental values.     

Coking-resistant Ni-ZrO2/A1203 catalyst for CO methanation

Highly coke-resisting ZrO2-decorated Ni/A1203 catalysts for CO methanation were prepared by a two-step process. The support was first loaded with NiO by impregnating method and then modified with ZrO2 by deposition-precipitation method （IM-DP）. Nitrogen adsorption- desorption, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetdc analysis, H2 temperature- programmed reduction and desorption, NH3 temperature-programmed desorption, and zeta potential analysis were employed to characterize the samples. The results revealed that, compared with the catalysts with the same composition prepared by co-impregnation （CI） and sequential impregnation （SI） methods, the Ni/A1203 catalyst prepared by IM-DP showed much enhanced catalytic performance for syngas methanation under the condition of atmospheric pressure and a high weight hourly space velocity of 120000 mL.g-1 .h-1. In a 80 h life time test under the condition of 300-600 ~C and 3.0 MPa, this catalyst showed high stability and resistance to coking, and the amount of deposited carbon was only 0.4 wt%. On the contrary, the deposited carbon over the catalyst without ZrO2 reached 1.5 wt% after a 60 h life time test. The improved catalytic performance was attributed to the selective deposition of ZrO2 nanoparticles on the surface of NiO rather than A1203, which could he well controlled via changing the electrostatic interaction in the DP procedure. This unique structure could enhance the dissociation of CO2 and generate surface oxygen intermediates, thus preventing carbon deposition on the Ni particles in syngas methanation.